Basic Info.
Structure Type
Vane Style
Output Signal Type
Modbus-RTU
Accuracy Grade
0.2%,0.5%,1.0%
Customized
Customized ,Non-Customized
Application
Flow Measurement
Process Connection
Thread for R,NPT,G,Zg
Pressure
1.6MPa,4.0MPa,ANSI
Medium Temperature
-20 ºC ~ +120 ºC
Transport Package
Carton or Wood Case
Product Description
Product Description
Overview:
Model LWGY turbine flow meter adapts to measure the liquid rate and total flowrate of low viscosity. It can be widely used in the fields of Petrol, Chemical industry, Metallurgy, Scientific research for measuring or control. Several output and display methods can be selected.
Operating Principle:
{0>,,,,,,,,,.<}0{>A permanent magnet, an induction coil and an amplifying unit are placed in the preamplifier. When the measured fluid is flowing across the flow meter, it drives the turbine to rotate, and the turbine periodically changes reluctance value of the magnetic circuit, which makes the magnetic flux passing the coil vary periodically, thus to induce in the coil the pulsating current signal, which is delivered to a secondary instrument after amplification and treatment, or provide in-situ display, so as to achieve flow rate accumulation.<0}<><}0{>
{0>,,.<}0{><0}<><}0{> Within the measuring range, the impeller rotate is positively proportional to the flow rate, namely the impulse total is in direct ratio to the quantity flow.<0}{0><}0{><0}<><}0{>"K"(/L).<}0{><0}{0><}0{><0}<><}0{>Ratio of the two is termed as K-factoryt, which is indicated by letter "K" (P/L).<0}{0><}0{><0}{0><}0{><0}<><}0{>.<}0{><0}{0><}0{><0}{0><}0{><0}<><}0{>The instrument constant value of each flow meter is educed by means of actual flow calibration.<0}{0><}0{><0}{0><}0{><0}{0><}0{><0}<><}0{>fN,K,q(L/s)Q(L).<}0{><0}{0><}0{><0}{0><}0{><0}{0><}0{><0}<><}0{>Divide impulse frequency f and impulse total N measured by the flow meter by instrument constant K of it respectively, the flow rate rate q (L/s) and the quantity Q (L) will be calculated.<0}{0><}0{><0}{0><}0{><0}{0><}0{><0}{0><}0{><0}<><}0{>:<}0{><0}{0><}0{><0}{0><}0{><0}{0><}0{><0}{0><}0{><0}<><}0{>i.e. <0}<><}0{><0}{0><}0{><0}{0><}0{><0}{0><}0{><0}{0><}0{><0}<><}0{>
q = ƒ/K (L /s ).
Q = N/K (L)
Medium:
Normal TEMP.:Water, Weak corrosive organic solvent, liquid medicine, gasoline, diesel and other clean media
Low TEMP.:liquid nitrogen,liquid oxygen and so on
Hight TEMP: hot water,hot oil and so on
<0}<><}0{><0}{0><}0{><0}{0><}0{><0}{0><}0{><0}{0><}0{><0}<><}0{>
Detailed Photos
Product Parameters
Measure medium: | Water, alcohol, liquid medicine, gasoline, diesel and other clean media |
Nominal diameter: | DN4 -- DN300mm |
Measurement accuracy: | 0.2, 0.5, 1.0 |
Medium viscosity: | less than 5 × 10-6m2 / s (for the liquid with >5 × 10-6m2 / s , the flowmeter needs to be calibrated before using) |
Nominal pressure: | 1.6Mpa; 2.5Mpa; 4.0Mpa; 6.3Mpa......42Mpa(CLASS 150......CLASS 6000) |
Medium temperature: | -20 ºC ~ +120 ºC (Normal TEMP),-200ºC(Low TEMP),+160 ºC(High TEMP) |
Environmental conditions: | Ambient temperature: -20 ºC ~ +60 ºC; Relative humidity: 5% to 95%; Atmospheric pressure: 86kPa ~ 106kPa; |
Power supply: | 12-24VDC,3.6VDC |
Output signal: | 4-20mA,PULSE,RS485(MODBUS),HART,ALARM SIGNLE |
Ingress protection : | IP65, IP66, IP68 |
1 :m3 /h<}0{>For technical performances of the turbine flow meter , namely Nominal Diameter, Nominal Pressure, Max. Pressure Loss, measuring Range etc., please see Table for details. Unit: m3 /h<}0{>
{0><}0{>Nominal diameter<0}<><}0{>
Dn
(mm) | {0><}0{><0}<><}0{> Flow rate<0}<><}0{><0}<><}0{> | {0><}0{><0}<><}0{><0}<><}0{>Nominal pressure <0}<><}0{><0}<><}0{><0}<><}0{>
PN
(Mpa) | {0><}0{><0}<><}0{><0}<><}0{><0}<><}0{>Max pressure loss<0}<><}0{><0}<><}0{><0}<><}0{><0}<><}0{>
(Mpa) |
{0><}0{><0}<><}0{><0}<><}0{><0}<><}0{><0}<><}0{>Intrinsic error limit<0}<><}0{><0}<><}0{><0}<><}0{><0}<><}0{><0}<><}0{>
±0.2% | {0><}100{><0}<><}0{><0}<><}0{><0}<><}0{><0}<><}0{><0}<><}0{>Intrinsic error limit<0}<><}100{><0}<><}0{><0}<><}0{><0}<><}0{><0}<><}0{><0}<><}0{>
0.5% | {0><}100{><0}<><}100{><0}<><}0{><0}<><}0{><0}<><}0{><0}<><}0{><0}<><}0{>Intrinsic error limit<0}<><}100{><0}<><}100{><0}<><}0{><0}<><}0{><0}<><}0{><0}<><}0{><0}<><}0{>
1.0% |
|
| {0><}0{><0}<><}100{><0}<><}100{><0}<><}0{><0}<><}0{><0}<><}0{><0}<><}0{><0}<><}0{>Lower limit<0}<><}0{><0}<><}100{><0}<><}100{><0}<><}0{><0}<><}0{><0}<><}0{><0}<><}0{><0}<><}0{> | {0><}0{><0}<><}0{><0}<><}100{><0}<><}100{><0}<><}0{><0}<><}0{><0}<><}0{><0}<><}0{><0}<><}0{>Upper limit<0}<><}0{><0}<><}0{><0}<><}100{><0}<><}100{><0}<><}0{><0}<><}0{><0}<><}0{><0}<><}0{><0}<><}0{> | {0><}100{><0}<><}0{><0}<><}0{><0}<><}100{><0}<><}100{><0}<><}0{><0}<><}0{><0}<><}0{><0}<><}0{><0}<><}0{>Lower limit<0}<><}100{><0}<><}0{><0}<><}0{><0}<><}100{><0}<><}100{><0}<><}0{><0}<><}0{><0}<><}0{><0}<><}0{><0}<><}0{> | {0><}100{><0}<><}100{><0}<><}0{><0}<><}0{><0}<><}100{><0}<><}100{><0}<><}0{><0}<><}0{><0}<><}0{><0}<><}0{><0}<><}0{>Upper limit<0}<><}100{><0}<><}100{><0}<><}0{><0}<><}0{><0}<><}100{><0}<><}100{><0}<><}0{><0}<><}0{><0}<><}0{><0}<><}0{><0}<><}0{> | {0><}100{><0}<><}100{><0}<><}100{><0}<><}0{><0}<><}0{><0}<><}100{><0}<><}100{><0}<><}0{><0}<><}0{><0}<><}0{><0}<><}0{><0}<><}0{>Lower limit<0}<><}100{><0}<><}100{><0}<><}100{><0}<><}0{><0}<><}0{><0}<><}100{><0}<><}100{><0}<><}0{><0}<><}0{><0}<><}0{><0}<><}0{><0}<><}0{> | {0><}100{><0}<><}100{><0}<><}100{><0}<><}100{><0}<><}0{><0}<><}0{><0}<><}100{><0}<><}100{><0}<><}0{><0}<><}0{><0}<><}0{><0}<><}0{><0}<><}0{>Upper limit<0}<><}100{><0}<><}100{><0}<><}100{><0}<><}100{><0}<><}0{><0}<><}0{><0}<><}100{><0}<><}100{><0}<><}0{><0}<><}0{><0}<><}0{><0}<><}0{><0}<><}0{> |
| 2* | - | - | - | - | 0.010 | 0.130 | 1.6 | 0.15 |
| 3* | - | - | - | - | 0.040 | 0.250 | 1.6 | 0.12 |
| 4* | - | - | - | - | 0.04 | 0.25 | 1.6
2.5
4.0
6.3
16
25
35
42
|
| 6 | | | 0.1 | 0.6 | 0.1 | 0.6 | 0.08 |
| 10 | | | 0.25 | 1.2 | 0.2 | 1.2 |
| 15 | 1 | 4 | 0.6 | 4 | 0.4 | 4 |
| 20 | 1.5 | 7 | 1.1 | 7 | 0.7 | 7 |
| 25 | 2 | 10 | 1.6 | 10 | 1 | 10 | 0.04 |
| 32 | 3.2 | 15 | 2.5 | 15 | 1.5 | 15 |
| 40 | 4 | 20 | 3 | 20 | 2.0 | 20 |
| 50 | 8 | 40 | 4 | 40 | 4 | 40 |
| 65 | 12 | 60 | 6 | 60 | 7 | 70 |
| 80 | 20 | 100 | 10 | 100 | 10 | 100 |
| 100 | 25 | 160 | 20 | 160 | 20 | 200 | {0>1.62.5<}0{><0}<><}100{><0}<><}100{><0}<><}100{><0}<><}100{><0}<><}0{><0}<><}0{><0}<><}100{><0}<><}100{><0}<><}0{><0}<><}0{><0}<><}0{><0}<><}0{><0}<><}0{>1.6 or 2.5 <0}<><}0{><0}<><}100{><0}<><}100{><0}<><}100{><0}<><}100{><0}<><}0{><0}<><}0{><0}<><}100{><0}<><}100{><0}<><}0{><0}<><}0{><0}<><}0{><0}<><}0{><0}<><}0{> |
| 150 | 50 | 300 | 40 | 300 | 40 | 400 |
| 200 | 120 | 600 | 100 | 600 | 80 | 800 | 1.6 |
| 250 | 200 | 1000 | 160 | 1000 | 120 | 1200 |
| 300 | | | 250 | 1600 | 180 | 1800 |
<0}<><}0{><0}<><}100{><0}<><}100{><0}<><}100{><0}<><}100{><0}<><}0{><0}<><}0{><0}<><}100{><0}<><}100{><0}<><}0{><0}<><}0{><0}<><}0{><0}<><}0{><0}<><}0{>
Installation Instructions
{0>,(),.<}0{>In order to ensure a high measuring accuracy, the flow meter shall be horizontally installed on a horizontal pipeline, and the arrow sign on the flow meter that indicates the flow direction shall be made consistent with the liquid flow direction.<0}{0><}0{>,,.<}0{><0}{0><}0{>In case a vertical installation is a must, the liquid shall be made flow from the down to top, so that the body of the flow meter will be ensured full of liquid.
To eliminate influences of the measuring accuracy resulting from uneven flow velocity distribution of cross section inside a pipeline, both the upperstream and the downstream of the flow meter shall be installed with definite straight lengths, or be installed with flow straighteners to substitute some straight lengths.<0}<><}0{><0}{0><}0{>
<0}<><}0{><0}{0><}0{>
Packaging & Shipping
The small parts of the instrument are packed in cartons, protected by wrapping film, and the large parts are packed in export wooden cases
Certifications
Our Advantages
Address:
No. 328, Hengyong Road, Jiading District, Shanghai, China
Business Type:
Manufacturer/Factory
Business Range:
Electrical & Electronics, Industrial Equipment & Components, Instruments & Meters, Manufacturing & Processing Machinery, Tools & Hardware
Management System Certification:
ISO 9001
Company Introduction:
Shanghai Gexin Automation Instrument Co., Ltd. is located in Shanghai, the economic center of China. Since its establishment in 2001, it has mainly solved sensor technology solutions for customers in the process of automatic production. Through the cooperation of Gexin instrument staff, we have accumulated rich sensor technology and experience in the development process of self built factory. The company′s products mainly include: Electromagnetic flowmeter, liquid turbine flowmeter, gas turbine flowmeter, vortex street flowmeter, metal tube rotameter and other flowmeters. At the same time, we have developed temperature sensors, pressure sensors, liquid level sensors, It has achieved a one-stop service for the detection of various physical quantities of industrial automation. Users are all over the printing and dyeing, electric power, chemical industry, environmental protection, urban construction, sewage treatment, papermaking, education, scientific research and other industries.
Shanghai Gexin Automation Instrument Co., Ltd. Has been paying attention to the R & D and updating of products. With the cooperation of mechanical design department, electronic circuit R & D department, software design department and other R & D departments, we ensure that the company′s products continue to bring forth new ones; Our superb sales and after-sales service team provide customers with complete products selection, product supply, technical support, user training, maintenance, etc The complete set of attentive service has won the good mouth of customers
){kind=link}